2024.04.02 [Screw Rescue Report] Panasonic Electric Shaver Screw

This is a Screw Rescue Report from a customer in Tokyo, Japan's capital.

★ Issue Description:

"I attempted to replace the battery in my Panasonic electric shaver, but as shown in the attached photo, the screw became stripped, making it impossible to remove the screw. I'm really stuck and need to get it off somehow. I contacted you in hopes of learning a good method to remove it."

★ Work Log:

Upon checking the screw groove, it was found that a little bit of cross corners remained. Therefore, we used a Neji-BAZOOKA DBZ-57 (So called Rapid Screw Extractor), successfully removing the screw.

For information on the Neji-BAZOOKA (DBZ-57), visit here:

English: https://www.engineertools-jp.com/dbz57

Japanese: https://x.gd/MUn9b

★ Customer Appreciation: 

Upon informing the customer that the screw had been rescued, we received a delightful response: "I never imagined that a screw so damaged could be removed, and I had almost given up hope. I'm truly impressed and grateful."

ENGINEER's Neji-Chat (Chatbot) service (R) Our Chatbot service solves your screw-related trouble in a few steps!

Visit now https://engineertools-jp.com/nejichat

For more information, visit our website and YouTube channel!

ENGINEER GLOBAL

YouTube ENGINEER channel

Facebook

X

2024.04.01 [Screw Rescue Report] Cordless Vacuum Cleaner Screw

This is a Screw Rescue Report from a customer in Aichi Prefecture, Tokai region, Japan.

★ Trouble Description:

"I attempted to replace the battery of a cordless vacuum cleaner from a certain manufacturer, but I ended up stripping one of the screws, making it impossible to remove. It seems that it's not a standard Phillips screw. I tried various methods, but I found it beyond my capabilities as an amateur, so I reached out for assistance."

★ Work Log:

The screw type was a Pozidriv, with the cross groove on the screw head completely worn out. Therefore, in this case, we drilled a pilot hole with a Φ2mm drill and successfully removed the screw by utilizing a trick of the Neji-Mogura DBZ-420, Socket Scrwe Extractor.

ENGINEER's Neji-Chat (Chatbot) service (R) Our Chatbot service solves your screw-related trouble in a few steps!

Visit now https://engineertools-jp.com/nejichat

For more information, visit our website and YouTube channel!

ENGINEER GLOBAL

YouTube ENGINEER channel

Facebook

X

2024.03.28 [Screw Rescue Report] Espresso Grinder Screw

This is a Screw Rescue Report from a customer in Fukuoka Prefecture, Kyushu region, Japan.

★Issue Description:

"Around 5mm screw holding the blade of the espresso grinder is tight and couldn't be removed, and unfortunately, I stripped the screw head. Despite trying various screw removal tools from other companies, I couldn't manage to loosen it. I'm not sure how to remove this screw."

★ Work log:

Since the customer had already drilled a pilot hole with a Φ4mm drill, we used the Neji-Mogura DBZ-440 (So called Socket Screw Extractor) in that hole, and the screw came out easily!

★ From the Staff:

As we've previously introduced, a trick of the Mogura is making a pilot hole with a drill. In this case, the customer had already drilled a pilot hole in preparation for using another company's screw extractor, so we utilized that hole directly.

Now, why could our Mogura remove the screw easily while other company's extractors couldn't? The reason is the precision of Mogura's manufacturing. It's clear when compared to other company's extractors; our mole's spiral processing precision is extremely high and precise (Made in Japan). Because this spiral firmly grips the target object, screws that can't be removed by other company's extractors can be easily removed with our Mogura.

ENGINEER's Neji-Chat (Chatbot) service (R) Our Chatbot service solves your screw-related trouble in a few steps!

Visit now https://engineertools-jp.com/nejichat

For more information, visit our website and YouTube channel!

ENGINEER GLOBAL

YouTube ENGINEER channel

Facebook

X

2024.02.27 [Screw Rescue Report] Old Radio Cassette Player

This is a Screw Rescue Report from a customer in Sada-cho, Izumo City, Shimane Prefecture, in the Chugoku region of Japan.

★Issue Description:

The customer reported trouble with the tape recorder recorder of an old radio cassette player (Panasonic RX-DS30). They attempted to open the back cover to repair it but encountered difficulty as all five screws on the back were tightly fastened and could not be removed. They reached out for assistance on how to remove these screws.

★Work Log:

Upon receiving the device, our team used a fiber scope camera to check the screws. The Screw Rescue Team initiated the operation, successfully rescuing all the recessed screws using the powerful magnetic Screw Catcher (Part No: DR-19).

★Customer Appreciation:

The customer expressed gratitude, stating, "I was saved. I had given up in the past when trying to repair another used radio cassette player because it wouldn't open. Thank you very much for your prompt assistance this time!" 🦖

ENGINEER's Neji-Chat (Chatbot) service Our Chatbot service solves your screw-related trouble in a few steps!

Visit now https://engineertools-jp.com/nejichat

For more information, visit our website and YouTube channel!

ENGINEER GLOBAL

YouTube ENGINEER channel

Facebook

X

2024.02.09 [Screw Rescue Report] Portable Power Supply Screw

This is a Screw Rescue Report regarding a portable power supply from a customer in Minoh City, Osaka Prefecture, Kansai region, Japan.

★ Issue Description

This is a repeat request from a customer who had previously used Screw Rescue services.

★ Work Log

After adjusted the timing, the customer brought the actual product to our company. The Screw Rescue Team initiated the operation. With Urusu-kun overseeing, we successfully rescued the device using a prototype of Neji-Mogura (So called Socket Screw Extractor), specially designed for screw-related issues."

ENGINEER's Neji-Chat (Chatbot) service Our Chatbot service solves your screw-related trouble in a few steps!

Visit now https://engineertools-jp.com/nejichat

For more information, visit our website and YouTube channel!

ENGINEER GLOBAL

YouTube ENGINEER channel

Facebook

X

2024.02.07 [Screw Rescue Report] Electronic Cigarette

This is a Screw Rescue Report from a customer in Joudou, Morioka City, Iwate Prefecture, in the Tohoku region of Japan.

★ Issue Description:

"The Pozidriv (R) head screw on the bottom of my electronic cigarette became stripped. Despite attempting to use another company's tool, the so-called "Removing Stripped Precision Screws", the hole only deepened, and I couldn't remove the screw at all. I don't know how to remove this screw, and if possible, I would like to send the product to you for screw removal."

★ Work Log:

The product was promptly sent to us, and the Screw REscue Team initiated the operation. Using the Neji-Mogura Middle Size DBZ-420, Socket Screw Extractor, and Ratchet Drive DZ-50, the rescue was remarkably successful.

★ Customer Appreciation:

"I couldn't figure out how to do it ourselves, so I am extremely grateful. Thank you very much for your help," came the delightful message 🦖.

ENGINEER's Neji-Chat (Chatbot) service Our Chatbot service solves your screw-related trouble in a few steps!

Visit now https://engineertools-jp.com/nejichat

For more information, visit our website and YouTube channel!

ENGINEER GLOBAL

YouTube ENGINEER channel

Facebook

X